you need

1. a tape measure
2. a pen and piece of paper
3. a second person to hold the tape measure

steps

Decide if you want your blinds to fit on the inside of the jamb (the most popular choice) or on the outside of the jamb.

inside fit

1. Measure the width of the window from jamb to jamb. We recommend you measure it in three places* and write down the shortest measurement. *You only need to measure in one place for vertical blinds.
2. Measure the drop from the top jamb to the bottom jamb (or windowsill). We recommend doing this in three places and write down the shortest measurement.
   
3. Do not make any adjustments to these measurements for gaps, etc.
   

outside fit

1. Measure the width of the window from architrave to architrave. We recommend you measure it in three places* and write down the shortest measurement. *You only need to measure in one place for vertical blinds.
2. Measure the drop from the top of where you want your blind to hang to the bottom. We recommend doing this in three places and write down the shortest measurement.
3. Do not make any adjustments to these measurements for gaps, etc.
   

tips & tricks

1. Write down the measurements in millimetres (mm) to the nearest 1mm. It can be helpful to draw a diagram of the room so you remember which measurement is for which window.
2. Keep an eye out for tiles and handles and other details that need to be taken into account to ensure your blinds fit perfectly.
3. For each window, note if you want your controls on the left or right-hand side. (This is which side of your body as you face the window).

Too hard? Don’t worry. We offer FREE measure and quote. Don’t hesitate to contact us TODAY. Email info@blindsmith.co.nz or Call 0800 16 1415.